A nursing problem statement explains, in one to three short paragraphs, what is going wrong in practice, who it affects, how big it is, why it matters, and what is missing that your project will address. It is the first thing faculty read and the foundation everything else rests on.
When a problem statement is vague, the PICOT question drifts, the literature search sprawls and the intervention looks arbitrary. A sharp one makes every later chapter easier to write.
Quick Answer
A strong nursing problem statement names a specific problem in a specific population and setting, proves its size with local and national data, explains the consequences for patients and the organization, identifies the gap between current and best practice, and ends with what the project will do about it.
Formula: In [population and setting], [problem] occurs at [rate], compared with [benchmark], leading to [consequences]. Current practice [gap]. This project will [purpose].
The Five Parts of a Problem Statement
| Part | Question it answers | Example |
|---|---|---|
| 1. The problem | What is happening? | Hospital-acquired pressure injuries |
| 2. Population and setting | Who and where? | Adults in a 24-bed medical ICU |
| 3. Magnitude | How big is it? | Local rate compared with a national benchmark or hospital target |
| 4. Consequences | Why does it matter? | Pain, infection, longer stays, cost, and nonreimbursable harm |
| 5. Gap and purpose | What is missing, and what will you do? | No consistent repositioning schedule; the project will implement one |
If any part is missing, a reviewer will notice. Magnitude and gap are the two most often left out.
Proving Magnitude With Data
Use two levels of data. National data show the problem is important. Local data show it is happening here.
- National sources: the CDC, AHRQ, CMS, professional organizations and recent systematic reviews.
- Local sources: unit quality dashboards, incident reports, chart audits, patient surveys and your manager or quality department.
If you cannot get exact local numbers, a small audit you run yourself (for example, 30 charts) is acceptable for most student projects. State how you got the figure. Never estimate a local number without saying it is an estimate, and never invent one.
A gap analysis is a useful step before you write, because it lays the current state beside the desired state. Our guide to gap analysis in healthcare shows how.
A Fill-In Formula
In [population] on/at [setting], [problem] occurs at [local rate], compared with [benchmark or target]. This results in [consequences for patients, staff and the organization]. Current practice [describe the gap: what is not being done or is done inconsistently], although evidence supports [best practice]. The purpose of this project is to [action] in order to [expected outcome].
Use the formula for your first draft, then rewrite it in natural sentences. Faculty can tell when a statement has been filled into a template word for word.
Weak vs Strong: Same Topic
Weak. Falls are a big problem in hospitals and can cause injury. Nurses should do more to prevent falls. This project is about fall prevention.
Strong. On a 32-bed medical-surgical unit, the fall rate in the last two quarters was above the hospital's target, and most falls occurred when patients walked to the bathroom unassisted at night. Falls with injury lengthen hospital stays and add costs that hospitals often cannot recover from payers. The unit has no structured rounding process, although evidence supports purposeful hourly rounding to anticipate toileting needs. The purpose of this project is to implement purposeful hourly rounding on night shift to reduce falls.
The strong version names the place, shows the problem is real locally, explains why it matters, identifies what is missing, and points to the project. In your own version, replace "above the hospital's target" with your actual figures.
Problem Statement Examples by Level
BSN Example: Pain Reassessment
On a surgical unit, a 40-chart audit found that pain was reassessed within one hour of PRN opioid doses less than two thirds of the time, below the unit's documentation standard. Missed reassessment risks both uncontrolled pain and unrecognized oversedation. Nurses report forgetting during busy medication passes, and the electronic record has no reminder. This project proposes an EHR reminder and brief staff education to improve timely reassessment.
MSN Example: New Graduate Readiness
On a step-down unit, half of new graduate nurses hired in the past year left within 12 months, and exit interviews cited low confidence in recognizing deterioration. Early turnover is costly and leaves units short of experienced staff. Orientation currently relies on precepted shifts alone, without structured simulation. The purpose of this project is to design and evaluate a simulation-based orientation module to improve new graduate confidence and recognition of deterioration.
DNP Example: Hypertension Control
At a federally qualified health center, fewer than half of adults with hypertension had controlled blood pressure at their last visit, below the clinic's quality target. Uncontrolled hypertension raises the risk of stroke, heart attack and kidney disease, and the clinic serves a population with limited access to follow-up. Patients are seen every three to six months with no monitoring between visits. This project will implement home blood pressure monitoring with nurse telephone follow-up to increase the proportion of patients with controlled blood pressure.
These examples show structure. Use your own site's numbers and wording in your paper.
From Problem Statement to PICOT
A good problem statement already contains most of your PICOT question. The population and setting become P, the purpose becomes I, current practice becomes C, and the consequence you most want to change becomes O.
From the falls example: In adults on a medical-surgical unit (P), does purposeful hourly rounding on night shift (I), compared with current care (C), reduce falls per 1,000 patient days (O) over eight weeks (T)? For the PICOT parts in more depth, see our PICOT format guide.
Length and Placement
For most BSN papers, the problem statement is one to two paragraphs, often 150 to 300 words. In MSN and DNP proposals it may be a full section with subheadings for background, significance and the local problem. It usually appears in the introduction or as Chapter 1, before the PICOT question and the literature review.
Write it first, but revise it last. Your understanding of the problem will sharpen as you read the evidence, and your final draft should match the outcome you actually measured.
Common Mistakes
- Starting with a cliché. "Since the beginning of time, nurses have..." wastes the most important sentence.
- Only national data. Without local data, the problem could be anywhere.
- Naming the solution as the problem. "The problem is the lack of hourly rounding" assumes the answer. State the harm, then the gap.
- Too broad. "Medication errors in hospitals" cannot be addressed in one project.
- No purpose sentence. The reader should know what the project will do by the end of the statement.
- Invented or unsourced numbers. Every figure needs a source, even if the source is your own audit.
Help With Your Problem Statement
NurseCapstone writers help with problem statements, background and significance sections, PICOT questions and full capstone chapters. Send your topic, any data you have and your rubric.
Work is written from scratch and plagiarism-checked, your identity is never shared with the writer, and revisions within the scope of your original request are free.
Need a Clear, Convincing Problem Statement?
Start My Problem StatementFree revisions · Full refund if late
Frequently Asked Questions
A short section that explains what is going wrong in practice, who it affects, how big the problem is, why it matters, what gap exists between current and best practice, and what the project will do.
Usually one to two paragraphs (about 150 to 300 words) in a BSN paper, and a longer section with background and significance in MSN and DNP proposals.
National data to show importance and local data, such as unit rates or a chart audit, to show the problem exists in your setting.
On a medical-surgical unit, falls exceed the hospital target, mostly during unassisted bathroom trips at night; falls with injury prolong stays; there is no structured rounding; the project will implement purposeful hourly rounding.
It should end with the project's purpose, but the problem itself should be stated as the harm and the gap, not as the absence of your chosen intervention.
The problem statement supplies most of the PICOT: population and setting, the intervention named in the purpose, current practice as the comparison, and the outcome you want to change.